Magnetic-inductive insertion flowmeter

• Sensor with no moving parts
• Flowmeter with 2-point control function, without display
• Application-specific calibration via teach-in functionality
• Clean-in-Place (CIP) capable
• FDA-compliant materials

Magnetic-inductive insertion flowmeter

• Sensor with no moving parts
• Displays both flow rate and volume
• Simulation of all output signals
• Clean-in-Place (CIP) capable, FDA-compliant materials
• Version with Alloy C22 electrodes

Magnetic-inductive insertion flowmeter

• Sensor with no moving parts
• Displays both flow rate and volume
• Simulation of all output signals
• Clean-in-Place (CIP) capable, FDA-compliant materials
• Version with Alloy C22 electrodes
  

Magnetic-inductive flow sensor, small flow rates

• To be combined with the Type SE58 transmitter (with or without display, in compact or remote version) for flow measurement
• Clean-in-Place (CIP) capable
• Flow measurement 0.2…approx. 200 l/min for DN 03…DN 20

Magnetic-inductive flow sensor without flange (wafer-type connection version)

• To be combined with the Type SE58 transmitter (with or without display, in compact or remote version) for flow measurement
• Version primarily for use in water applications
• Flow measurement 25…approx. 75,000 l/min for DN 25…DN 400

Magnetic-inductive flow sensor with flange

• To be combined with the Type SE58 transmitter (with or without display, in compact or remote version) for flow measurement
• Version primarily for use in water applications
• Flow measurement 25…approx. 75,000 l/min for DN 25…DN 400

Magnetic-inductive flow sensor with hygienic process connections

• To be combined with the Type SE58 transmitter (with or without display, in compact or remote version) for flow measurement
• Hygienic version, 3-A certified
• For food, beverage or pharmaceutical applications
• Flow measurement 0.2…approx. 4,500 l/min for DN 03…DN 100

Transmitter for magnetic-inductive flow sensors

• Must be combined with the Type S051, Type S054, Type S055 or Type S056 sensor
• Continuous measurement, high accuracy
• Various housing shapes and materials available
• Compact and remote design, available with or without display

Paddlewheel sensor for low flow rates

• Cost-effective solution for low flow values and liquids with low solids content
• Media-contact parts made of ECTFE, sapphire, coated stainless steel, FKM or EPDM for use in aggressive liquids
• 3-wire technology with paddlewheel and Hall sensor up to 80 °C, 10 bar
• Frequency output proportional to flow rate, PLC-compatible

Paddlewheel flowmeter for continuous measurement

• Cost-effective integration into pipe systems without additional piping
• Optical or magnetic measuring principle
• Outputs: one analog output 4...20 mA and/or one transistor output (frequency or switch)
• Configurable outputs (via USB interface with PC)

Insertion paddlewheel flowmeter for continuous measurement

• Cost-effective integration into pipe systems without additional piping
• 3-wire frequency-pulse version for direct connection to PLC (PNP and NPN)
• Simple connection to Bürkert evaluation units in remote version

Inline flowmeter for continuous measurement

• Cost-effective integration into pipe systems
• 3-wire frequency-pulse version for direct connection to PLC (PNP and NPN)
• Simple connection to Bürkert evaluation units in separate version
• -HT version available for high temperature and pressure (max. 125 °C/max. 40 bar)

Insertion flowmeter/batch controller with paddlewheel and flow transmitter/remote batch controller

• Up to PN 10, measuring pipe size DN 06…DN 400
• Display for showing flow rate and volume with two totalizers or dosing
• Automatic calibration via teach-in
• Verification of inputs (with batch controller) and all outputs without actual flow
• Total and daily counters for quantities and number of dosages, volume or mass counter display (with batch controller)

Inline flowmeter or inline batch controller, with paddlewheel

• Up to PN 16, measuring pipe size DN 06…DN 65
• Display for showing flow rate and volume with two totalizers or dosing
• Automatic calibration via teach-in
• Verification of inputs (with batch controller) and all outputs without actual flow
• Total and daily counters for quantities and number of dosages, volume or mass counter display (with batch controller)

Insertion flowmeter with paddlewheel, ELEMENT design

• Up to PN 10, measuring pipe size DN 20…DN 400
• Configurable outputs: one to two transistor outputs and one to two current outputs 4...20 mA
• Removable display/configuration module with backlight for showing flow rate and volume with two totalizers
• Automatic calibration via teach-in, verification of all outputs without existing flow

Flowmeter/threshold detector with paddlewheel

• Value display, monitoring, transmission and 2-point control, in one device
• Freely adjustable switch point (transistor or relay)
• Automatic calibration via teach-in
• Process value output: 4…20 mA
• Flow threshold detector

Inline flowmeter with paddlewheel, ELEMENT design

• Measuring pipe size DN 06…DN 65
• Configurable outputs: one to two transistor outputs and one to two current outputs 4...20 mA
• Removable display/configuration module with backlight for showing flow rate and volume with two totalizers
• Automatic calibration via teach-in, verification of all outputs without existing flow

Insertion fitting for flow or analysis measurements

• Can only be used in combination with Bürkert Type 8020, Type 8025, Type 8026, Type 8041, Type 8045, Type 8200 or Type 8228
• Universal fitting for insertion meters for neutral, aggressive or contaminated liquids
• Wide range of process connections: DN06…DN400 made of PVC, PP, PVDF, PE, stainless steel, brass
• Transmitter available for display, monitoring, signal transmission, 2-point control or batch control

Inline sensor fitting with integrated paddlewheel for flow measurements

• DN 06…DN 65
• Can only be used in combination with Bürkert Transmitter Type SE30, Type SE30 Ex, Type SE32, Type SE35, Type SE36 or Type 8611
• Many different materials and process connections available for ideal adaptation to individual applications and process conditions
• Closed pipe system, i.e. the sensor is part of the fitting
• Quarter-turn technology (Bürkert bayonet connection)
• Transmitter available for display, monitoring, signal transmission, 2-point control or batch control

Oval gear flow sensor for low flow rates

• For media with high viscosity
• Value display, monitoring, signal transmission, 2-point control, batch control in combination with various transmitters
• With integrated 1 m long cable
• Frequency output based on an open collector transistor (NPN)
• Housing: PPS with G1/4" or NPT 1/4"
• Can be combined with Type 8025 or Type 8619

Oval gear flow sensor for low flow rates

• For media with high viscosity
• Value display, monitoring, signal transmission, 2-point control, batch control in combination with various transmitters
• With integrated 1 m long cable
• Frequency output based on an open collector transistor (NPN)
• Housing: aluminum or VA 316L with G and NPT 1/8" and 1/4"
• Can be combined with Type 8025, Type 8611 or Type 8619

Inline sensor fitting with oval gears (displacement principle) for flow measurement

• DN15…DN100
• Inline quarter-turn technology
• Electronics available for display, monitoring, signal transmission, 2-point control, batch control
• Can be combined with Type SE30, Type SE30 Ex, Type SE32, Type SE35 or Type SE36 (equipped with Hall sensor)

Transmitter for inline sensor fitting

• Compatible with inline sensor fitting S030 with paddlewheel for flow measurement (see data sheets Types 8030, SE30 Ex, S030)
• Compatible with inline sensor fitting S077 with oval gears for flow measurement (see data sheet Type SE30+S077, SE30 Ex)

Paddlewheel transmitter with optical or magnetic measuring principle for flow measurement

• To be combined with the Type S012 fitting (see data sheet flowmeter Type 8012)

Transmitter or batch controller for inline sensor fitting

• Compatible with inline sensor fitting S030 with paddlewheel for flow measurement or dosing (see data sheets Type 8035 transmitter or Type 8035 batch controller)
• Compatible with inline sensor fitting S077 with oval gears for flow measurement (see data sheet Type SE35+S077)

Flow transmitter / pulse divider

• 2-wire (4…20 mA) / 3-wire (NPN/PNP) operation
• Can be mounted on flow sensors Type 8020, Type 8030 (SE30+S030), Type SE30+S077
• Removable operating unit

ELEMENT transmitter for inline sensor fitting

• Compatible with inline sensor fitting S030 with paddlewheel for flow measurement (see data sheet Type 8036)
• Compatible with inline sensor fitting S077 with oval gears for flow measurement (see data sheet Type SE36 + S077)

Transmitter for inline sensor fitting

• Compatible with inline sensor fitting S030 with paddlewheel for flow measurement (see data sheets Types 8032, S030)
• Compatible with inline sensor fitting S077 with oval gears for flow measurement (see data sheet Type SE32+S077)

Transmitter for magnetic-inductive flow sensors

• Must be combined with the Type S051, Type S054, Type S055 or Type S056 sensor
• Continuous measurement, high accuracy
• Various housing shapes and materials available
• Compact and remote design, available with or without display

• Nominal flow ranges from 0.01 lN/min to 160 lN/min (referring to nitrogen)
• High measurement and repeat accuracy
• Very fast response times
• Easy device replacement via configuration memory
• Optional: USP Class VI, FDA, EC 1935 compliance

• Nominal flow ranges from 0.01 lN/min to 160 lN/min (referring to nitrogen)
• High measurement and repeat accuracy
• Very fast response times
• Easy device replacement via configuration memory
• Optional: ATEX II Cat. 3G/D or USP Class VI, FDA, EC 1935 compliance

• Nominal flow range from 0.01 lN/min to 100 lN/min (referring to nitrogen)
• High measurement and repeat accuracy
• Suitable for aggressive gases
• User-friendly gas conversion
• Easy device replacement via configuration memory

• Nominal flow range from 0.01 lN/min to 100 lN/min (referring to nitrogen)
• High measurement and repeat accuracy
• Suitable for aggressive gases
• User-friendly gas conversion
• Easy device replacement via configuration memory

• Nominal flow ranges from 20 lN/min up to 2500 lN/min (referring to nitrogen)
• High measurement and repeat accuracy
• Communication via standard signals or Industrial Ethernet
• Electromagnetic and electric motor valve actuator available
• Easy device replacement via configuration memory

• Nominal flow ranges from 20 lN/min up to 2500 lN/min (referring to nitrogen)
• High measurement and repeat accuracy
• Electromagnetic and electric motor valve actuator available
• Easy device replacement via configuration memory
• Optional: ATEX II Cat. 3G/D or USP Class VI, FDA, EC 1935 compliance

Multi-channel mass flow controller, multi-channel mass flow meter for gases

• Nominal flow ranges from 0.01 lN/min to 20 lN/min
• High measurement and repeat accuracy
• Very fast response times
• 2 to 8 channels available
• Customized system

• Depth scale for accurate installation into existing pipelines
• Usable from 1/2" to 12" (DN 300)
• Standard and heavy duty versions available
• Integrated display

• Thermal mass flow measurement
• Integrated inlet and outlet sections for flow conditioning
• Pipe sizes up to 2"
• Integrated display
• Standard and heavy duty versions available

• Flow measurement, flow control up to 120 kg/h
• Very high accuracy and measuring span
• High long-term stability, no zero-point adjustments required
• Highly resistant media-contact materials
• Usable for numerous liquids

Flowmeter for continuous measurement of water

• Ultrasonic flowmeter based on the transit-time method
• Dynamic range ≥ 1:250
• Low pressure loss
• No inlet or outlet straight sections required
• Frequency (NPN) or 4…20 mA output
• External thread G3/4"...G5/4" and NPT3/4"...NPT5/4"
  
  

Flow control switch - normally closed or normally open

• Adjustable switch point
• Low pressure loss
• Reliable operation under difficult conditions
• For liquids

Variable area flowmeter

• Flow measurement of translucent liquids and gases
• DN10 to DN65 mm